WP6: “Networking & Dissemination”
| Work-Package Leader |
|
 |
Patric SALOMON 4M2C, 4M2C Patric Salomon GmbH Cranachstrasse 1 12157 Berlin , GERMANY Phone: +49 30 2435 7870 Fax: +49 721 1515 82528 E-mail: patric.salomon@4m2c.com |
| Work-Package Summary |
|
The objectives of the Dissemination and Networking task force (WP6) are to market the project's "virtual laboratory"
services and to get feedback on industry's needs for these services. The project's objectives, work plan, and achievements
need to be (constantly) communicated, discussed, and reflected with users of the Virtual Laboratory Services.
PATENT-DfMM is working closely with other groups to coordinate research and services in DfMM. A first workshop had been organised together with the NEXUS Methodology Working Group "Design Modelling Simulation (MWG DMS)" at DTIP (link to http://tima.imag.fr/conferences/dtip/DTIP2004) in Montreux on 11 May 2004. Close cooperation with MEMS Industry Group in the USA and their METRIC 2004 conference is also planned. PATENT-DfMM has set up an Industry Advisory Board, which is coordinated through WP6 in close cooperation with the project coordinator. PATENT-DfMM has established the National Institute for R&D in Microtechnologies (IMT), Bucharest, Romania as a special point of contact to the Eastern countries within WP6. IMT has the task to support the Management Board in addressing partners in the new EU member states and the ACC, especially with dissemination, training, and networking activities. The special needs of users of PATENT-DfMM services in the East will also be identified and taken care of. PATENT-DfMM disseminates the latest news through the PATENT-DfMM website and the following publications: Design for Micro & Nano Manufacture (DfMM) News (free of charge): bi-monthly E-Mail newsletter published by PATENT-DfMM For registration, please send E-mail to: dfmm-news@4m2c.com MST News (free of charge to European readers): bi-monthly journal with one page of News from PATENT-DfMM http://www.mstnews.de MNT Bulletin (free of charge to European readers): quarterly journal with one page of News from PATENT-DfMM http://www.imt.ro/MNT/ The DfMM E-Mail Newsletter is also open to publish YOUR news free of charge, if they are related to Design for Micro & Nano Manufacture and not too promotional. This could be anything DfMM-related like:
dfmm-news@4m2c.com |
 |
|||
 Partner List |
|||
| Services |
|||
| Publications |
|||
| Events |
|||
|
|||