WP2: “Modelling & Simulation”

PUBLICATIONS

"Design, manufacture and testing of a low-cost micro-channel cooling device" A. J. Pang, M.P.Y. Desmulliez, M. Leonard, R.S. Dhariwal, R.L. Reuben, A.S. Holmes, G. Hong, K.R. Pullen, F. Waldron, O. Slattery, M. Rencz, D.R. Emerson, R.W. Barber. 6th Electronics Packaging Technology Conference (EPTC 2004) organized by the IEEE (Dec 2004 Singapore) "Modelling, manufacture and test of a microchannel cooling plate for microelectronics packaging" A. J. Pang, M.P.Y. Desmulliez, M. Leonard, R.S. Dhariwal, R.L. Reuben, A.S. Holmes, G. Hong, K.R. Pullen, F. Waldron, O. Slattery, M. Rencz, D.R. Emerson, R.W. Barber. 6th International Conference on Electronic Materials & Packaging (EMAP) December 2004 Penang, Malaysia "Thermal characterisation of a radial microchannel cooling plate" Gy. Bognár, Gy. Horváth, Zs. Kohári, V. Székely, A.J. Pang, M.P.Y. Desmulliez, M.Rencz 1st Semiconductor Thermal Measurement and Management Symposium (SEMI-THERM'05) March 2005 San Jose, California, USA "Design and Test of Micro-Electronic Fluidic Systems" H.G. Kerkhoff, R.W. Barber, D. R. Emerson , R. Muller, O. Nedelcu and E. van der Wouden Proc. Workshop on MEMS, DATE March 2005, Munich, Germany. "Modelling of Micro-Electronic Fluidic Systems" O. Nedelcu, R.W. Barber, D. R. Emerson, H.G. Kerkhoff, R. Muller, and E. van der Wouden Romanian Journal for Information Science and Technology, 2005 "Modelling, Simulation and Testing of Micro-Electronic Fluidic Devices and Arrays" H.G. Kerkhoff Invited submission IEEE Transactions on CAD (Special Issue on MEMS), 2005. "Introduction to Testing MEMS" H.G. Kerkhoff Invited Tutorial European Test Symposium (ETS), Formal Proc. ETS, Tallinn, Estonia, May 2005. "Multipole BEM for the analysis of Stokes flow, Advances in Boundary Element Techniques V" Frangi A., Di Gioia A. (Proceedings of the BETECH Conference, Lisbon, Portugal, June 2004), V.M.A. Leitao and H. Aliabadi eds, EC Ltd Publisher, pp 103-108, 2004 "Multipole BEM for the evaluation of damping forces on MEMS" Frangi A., Di Gioia A. accepted for publication in Computational Mechanics, 2005 "A qualocation enhanced approach for the Dirichlet problem of exterior Stokes flow" Frangi A., Tausch J. Engineering analysis with Boundary Elements, submitted, 2005 "Considerations on Test Structures for MEMS" Denkiewicz, D., Rymuza, Z. Proceedings of 1st Vienna International Conference on Micro-Nanotechnology, March 9-11, 2005, Vienna, Austria. "Construction of nonlinear dynamic MEMS component models using Cosserat theory" C. Wang, D. Liu, R. Rosing, B. De Masi, A. Richardson Analog Integrated Circuits & Signal Processing, vol.40, no.2, Aug. 2004, pp.117-30. "Computational Cosserat Dynamics in MEMS Component Modelling" D. Liu, D.Q. Cao, and C. Wang Computational Cosserat Dynamics in MEMS Component Modelling. Computational Mechanics, Proceedings CD-ROM of the Sixth World Congress on Computational Mechanics (WCCM VI). Tsinghua University Press, Springer. Bejing, 2004. "MEMS beams with defects: a model of non-ideal rods using a Cosserat approach for component level modeling" T. Gould, C. Wang J. Micromech. Microeng, Vol. 15, Issue 1, pp. 76-80 (2005) "Three dimensional nonlinear dynamics of slender structures: Cosserat rod element approach" Cao, D. Q., Liu, D. and Wang, C. H.-T. Submitted to International Journal of Solids and Structures, 2004 (arxiv.org/abs/math.FA/0410286). "Nonlinear dynamic modeling for MEMS components via the Cosserat rod element approach" Cao D. Q. , Liu, D. and Wang, C. H.-T. Submitted to Journal of Micromechanics and Microengineering, 2005 ORAL CONTRIBUTIONS "Design and Test of Micro-Electronic Fluidic Systems" H.G. Kerkhoff Invited Presentation Workshop on MEMS, DATE March 2005, Munich. "Testing of MEMS" H.G. Kerkhoff Invited tutorial European Test Symposium, May, Tallinn Estonia, 2005