ACTIVITIES SUPPORTED TO DATE
IST-2003-507255 FP6 Network of Excellence “Design
for Micro & Nano Manufacture“ (PATENT DFMM)
Technical Activities Launched to Sept. 2004
Technical Activities Launched to Sept. 2004
| Project | DfT for Biosensor and for Biosensor Interface |
| Partners | Lancaster University, LIRMM, MESA, Twente |
| Workpage | 1 |
| Duration | Oct 2004 – Jan 2005 |
| Value | 22K |
| Objectives and Strategic Deliverables |
- New collaboration aiming to build distributed critical mass of researchers in DfT integration in bio-chemical MEMS. - Proposal preparation for national / EU funding - Services for Virtual Lab in Test Engineering. |
| Project | Design for Testability of Micro-Electronic Fluidic Arrays |
| Partners | MESA, Twente, LIRMM |
| Workpage | 1 |
| Duration | Oct 2004 – Dec 2004 |
| Value | 3K |
| Objectives and Strategic Deliverables |
Travel grant to help partners to launch of common actions in 2005 |
| Project | Quality Factor measurement and reliability for MEMS resonators |
| Partners | Universite Paris-Sud, Lancaster University, Qinetiq |
| Workpage | 1 |
| Duration | Oct 2004 – Jan 2005 |
| Value | 18K |
| Objectives and Strategic Deliverables |
A study involving a new collaboration to deliver a key skill base for a DfMM methodology for resonance based MEMS |
| Project | MEMS Testing through Bias Superposition |
| Partners | Lancaster University, LIRMM, Qinetiq , MESA, Twente |
| Workpage | 1 |
| Duration | Oct 2004 – Jan 2005 |
| Value | 22K |
| Objectives and Strategic Deliverables |
- New collaboration into an interesting possibility for MEMS built-in-Test - Potential for a new distributed collaborative group - New proposal preparation - Initial joint publication |
| Project | Benchmarks for MEMS testing |
| Partners | LIRMM |
| Workpage | 1 |
| Duration | Oct 2004 – Dec 2004 |
| Value | 3K |
| Objectives and Strategic Deliverables |
Foundation for a service for the Virtual Lab in Test Engineering |
| Project | Modelling and testing of microengineered cooler for microelectronics packaging |
| Partners | HWU, CCLRC, Budapest University Of Technology, NMRC |
| Workpage | 2 |
| Duration | Sept 2004 – January 2005 |
| Value | 31K |
| Objectives and Strategic Deliverables |
- New collaboration aiming to build Distributed critical mass of researchers in thermal & uFluidic simulation technology - Capability for the Virtual Lab in Simulation & Modelling. |
| Project | Mechanisms of formation of preferential flow paths in microcirculation vessels for BIOMEMS |
| Partners | Warsaw University of Technology, CCLRC |
| Workpage | 2 |
| Duration | Sept 2004 – Jan 2005 |
| Value | 8.2K |
| Objectives and Strategic Deliverables |
Visits from WUT to Daresbury to advance State-of-the-art |
| Project | Review of optical simulation and modelling techniques for MOEMS |
| Partners | Centre Spatial de Liege, Institute Of Microtechnologies, Bucharest,
Fraunhofer IZM, Berlin |
| Workpage | 2 |
| Duration | Sept 2004 – Jan 2005 |
| Value | 13K |
| Objectives and Strategic Deliverables |
- Compilation of State-of-art in the field - Compilation of partner skills portfolio for Virtual Laboratory |
| Project | Simulation of the stiction effect in the metal-to-metal resistive contact occurring in MEMS switches |
| Partners | Institute of Microtechnologies, Bucharest, NMRC, Heriot Watt University, Warsaw University of Technology |
| Workpage | 2 |
| Duration | Sept 2004 – Jan 2005 |
| Value | 21K |
| Objectives and Strategic Deliverables |
- Integration of partner skills - Advance in the field - Simulation service to industry (virtual lab) |
| Project | Fault Modelling and System Simulation of Flow-FETs |
| Partners | MESA, Twente, CCLRC, Institute Of Microtechnologies, Bucharest |
| Workpage | 2 |
| Duration | Sept 2004 – Jan 2005 |
| Value | 19K |
| Objectives and Strategic Deliverables |
- Joint FP6 / FP7 proposal - Joint publication - Web-site area - Collaborative service to the Virtual Laboratory – Simulation & Modelling |
| Project | Methodology to assess the impact of packaging on MEMS components |
| Partners | Qinetiq, Lancaster University, NMRC, Heriot Watt University, Politecnico Di Milano, Fraunhofer IZM, Munich and IZM, Berlin. |
| Workpage | 1,2,3,4 |
| Duration | Sept 2004 – Jan 2005 |
| Value | 118K |
| Objectives and Strategic Deliverables |
- Flagship project for year 1 - Cross WP project - 1st steps towards a new approach to design & network capability |
| Project | Reliability of M(O)EMS in harsh conditions |
| Partners | Centre Spatial de Liege, Universite Paris-Sud, Fraunhofer IMS,Dresden Budapest University of Technology, IXL, Fraunhofer IZM, Munich, Institute Of Microtechnologies, Bucharest |
| Workpage | 3 |
| Duration | Sept. 2004 – Jan 2005 |
| Value | 44K |
| Objectives and Strategic Deliverables |
- New application for funding - Critical distributed mass achieved in the field - Portfolio of services for the Virtual Laboratory in Reliability Engineering |
| Project | Reliability of MEMS basic movable structures |
| Partners | Institute of Microtechnologies Bucharest. IMEC, Universite Paris-Sud,
NMRC, Fraunhofer IMS Dresden, LAAS Toulouse, Politecnico Di Milano Warsaw University of Technology, Budapest University of Technology, University of Lancaster |
| Workpage | 3 |
| Duration | Sept. 2004 – Jan 2005 |
| Value | 57K |
| Objectives and Strategic Deliverables |
- Integration of teams - State-of-art review & publication - Service portfolio for the Virtual Laboratory in Reliability Engineering |
| Project | Methodology and high level design of failure modes of MEMS |
| Partners | IMEC, Heriot Watt University, LAAS Toulouse, Lancaster University |
| Workpage | 3 |
| Duration | Sept. 2004 – Jan 2005 |
| Value | 37K |
| Objectives and Strategic Deliverables |
- Development of an FMEA service - Critical mass in field of industrial demand - Joint publication - Service portfolio development |
| Project | Input for materials data bases |
| Partners | All WP3 partners |
| Workpage | 3 |
| Duration | Sept. 2004 – Jan 2005 |
| Value | 45.5K |
| Objectives and Strategic Deliverables |
Collection & integration of know-how for web-based database accessible through the Virtual Laboratory in Reliability Engineering |
| Project | Failure mode database |
| Partners | Heriot Watt University |
| Workpage | 3 |
| Duration | Sept. 2004 – Jan 2005 |
| Value | 9.5K |
| Objectives and Strategic Deliverables |
Collection integration of data into a web-based data base to support the Virtual Laboratory portfolio in Reliability Engineering |
| Project | MEMS testing by electro-thermal excitation |
| Partners | LIRMM, Budapest University of Technology, TIMA Grenoble, MICRED
Budapest |
| Workpage | 7 |
| Duration | Sept 2004 – Jan 2005 |
| Value | 18K |
| Objectives and Strategic Deliverables |
Support to the SME “MICRED” develop IPR that will be made available to the PATENT-DfMM NoE |
| Project | Scoping study for future programme to “Demonstrate a methodology for reliable, packaged of Micro and Nanosystems” |
| Partners | Qinetiq, Lancaster University, IMEC, NMRC, Fraunhofer IZM, Berlin,
Politecnico di Milano |
| Workpage | 7 |
| Duration | Sept 2004 – Jan 2005 |
| Value | 20K |
| Objectives and Strategic Deliverables |
Seed corn funding for the development of a new proposal for funding to demonstrate a DfMM methodology on a key product. |
| Project | MOEMS Packaging in harsh environment Phase 1 Study |
| Partners | CSL |
| Workpage | 4 |
| Duration | Sept. 2004 – Jan 2005 |
| Value | 12.5K |
| Objectives and Strategic Deliverables |
Development of a core skill for the Virtual lab in Package Engineering |
| Project | FEA and modelling of IMS packaging structures using ANSYS |
| Partners | ULAN, Fraunhofer IZM |
| Workpage | 4 |
| Duration | Sept. 2004 – Jan 2005 |
| Value | 12.4K |
| Objectives and Strategic Deliverables |
- Visits between the two institutes - Development of a core skill for the Virtual lab |
| Project | Packaging Failure Mode Database |
| Partners | IMEC |
| Workpage | 4 |
| Duration | Sept 2004 – Jan 2005 |
| Value | 8.5K |
| Objectives and Strategic Deliverables |
Key resource for the Virtual lab. |
| Project | Investigation of Laser Based Processes for MEMS Assembly and Packaging |
| Partners | Heriot Watt University, IMEC, Lancaster University |
| Workpage | 4 |
| Duration | Sept. 2004 – Jan 2005 |
| Value | 35K |
| Objectives and Strategic Deliverables |
- Development of a core skill for the Virtual Lab in Package Engineering - New collaborative team. |
| Project | Packaging Material Parameter database |
| Partners | Budapest University of Technology |
| Workpage | 4 |
| Duration | Sept. 2004 – Jan 2005 |
| Value | |
| Objectives and Strategic Deliverables |
Key resource for Virtual laboratory in Package Engineering |